Overview - Relay Panels, Fuse Panels And E-Boxes

1. Engine Compartment E-box
   • Removing and installing, refer to E-BOX, REMOVING AND INSTALLING 
   • Tightening specification, refer to Fig 4
2. Fuse Panel B -SB-
   • Relay/fuse panel in engine compartment E-box
   • Removing and installing, refer to Fuse Panel B -SB- IN E-BOX, REMOVING AND INSTALLING 
   • With Suppressor -C24-, removing and installing, refer to Suppressor -C24-, REMOVING AND INSTALLING .
3. Cover
   • For engine compartment E-box
   • Tightening specification, refer to Fig 3
4. Terminal 30 Wire Junction 2 -TV22-
   • There are different versions. Allocation, refer to the Parts Catalog.
   • Removing and installing, refer to Terminal 30 Wire Junction 2 -TV22-, REMOVING AND INSTALLING 
5. Fuse Panel D -SD-
   • On the right of the instrument panel
   • Removing and installing, refer to Fuse Panel D -SD- WITH RIGHT INSTRUMENT PANEL FUSE CARRIER, REMOVING AND INSTALLING 
6. Right Central Tube
7. Fuse Panel
   • Installed inside the Fuse Panel F -SF-
   • Removing and installing, refer to FUSE CARRIER IN RIGHT LUGGAGE COMPARTMENT, REMOVING AND INSTALLING 
8. Nut
   • 3 Nm
9. Fuse Panel F -SF-
   • Inside the luggage compartment on the right side
   • Removing and installing, refer to Fuse Panel F -SF- IN RIGHT LUGGAGE COMPARTMENT, REMOVING AND INSTALLING 
10. Fuse Panel A -SA-
    • In the luggage compartment on the battery
    • Removing and installing, refer to Fuse Panel A -SA- IN LUGGAGE COMPARTMENT, REMOVING AND INSTALLING 
11. Battery
12. Left Central Tube
13. Fuse Panel C -SC-
    • On the left side of the instrument panel
    • Removing and installing, refer to Fuse Panel C -SC- WITH LEFT INSTRUMENT PANEL FUSE PANEL, REMOVING AND INSTALLING 
14. Relay/Fuse Carrier Mount with Vehicle Electrical System Control Module -J519-
15. 3-Pin Relay/Fuse Carrier
    • Under the instrument panel on the left side
    • Removing and installing, refer to 3-PIN RELAY/FUSE CARRIER, REMOVING AND INSTALLING 
16. 4-Pin Relay/Fuse Carrier and Threaded Connection
    • Under the instrument panel on the left side
    • Removing and installing, refer to 4-PIN RELAY/FUSE CARRIER WITH THREADED CONNECTION, REMOVING AND INSTALLING 

1. Wire - 9 Nm
2. Wire - 9 Nm
3. 4-pin relay/fuse carrier

1. Screw - 3.5 Nm
2. Screw - 3.5 Nm
3. Engine compartment E-box cover
4. Screw - 3.5 Nm
5. Nut - 9 Nm

-- Tighten the bolts -arrows- on the engine compartment E-box -1- to 4.5 Nm.

1. Positive cable - 9 Nm
2. Fuse Panel B -SB-
3. Wire on the back - 9 Nm

1. Fan wire - 7.5 Nm
2. Fan wire - 7.5 Nm
3. PTC Wire - 7.5 Nm
4. Nut - 7.5 Nm
5. E-box positive cable - 7.5 Nm
6. Battery Cable - 18 Nm
7. Battery Jump Start Terminal -U6- - 20 Nm
8. Bolt - 7.5 Nm
9. Starter positive cable - 18 Nm
10. Nut - 7.5 Nm

1. Nut - 7.5 Nm
2. Nut - 7.5 Nm
3. Nut - 7.5 Nm
4. Nut - 7.5 Nm
5. Nut - 7.5 Nm
6. Nut - 7.5 Nm
7. Battery Cable - 18 Nm
8. Nut - 7.5 Nm
9. Bolt - 7.5 Nm
10. Nut - 7.5 Nm
11. Battery Jump Start Terminal -U6- - 20 Nm

1. Wire - 7.5 Nm
2. Nut - 9 Nm
3. Nut - 9 Nm
4. Fuse Panel A - SA- in Luggage Compartment
5. Wire - 7.5 Nm
6. Screw - 3.5 Nm
7. Battery Interrupt Igniter -N253-, refer to OVERVIEW - BATTERY INTERRUPT IGNITER .
8. Positive cable to engine - 18 Nm

1. Nut - 9 Nm
2. Screw - 3.5 Nm
3. Fuse Panel A - SA- in Luggage Compartment
4. Positive cable to engine - 18 Nm
5. Battery Interrupt Igniter -N253-, refer to OVERVIEW - BATTERY INTERRUPT IGNITER .