Charge Air Pressure Sensor - G31 - / - G447 -, Removing And Installing: Removing

Version 2 Cylinder Bank 1 (Right): 

Fig 1: Identifying Version 2 Cylinder Bank 1 (Right)

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and move the bracket and fuel hose -1- to the side.

Cylinder Bank 2 (Left): 

-- Free up the vacuum hose -1-.

-- Remove the screws -arrows- and remove the cover -2-.

Fig 2: Identifying Vacuum Hose -1-, Bolts -Arrows- And Cover -2-

Courtesy of AUDI OF AMERICA, LLC

Continued for Both Sides: 

-- Disconnect the connector -1-.

-- Remove the bolts -arrows- and remove the charge air pressure sensor.

Fig 3: Installation Location Charge Air Pressure Sensor -G31- /Intake Manifold Temperature Sensor -G72-

Courtesy of AUDI OF AMERICA, LLC