Outer Rear Belt Latch, Removing And Installing: Installing
-- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.
-- Connect the spring -3- to the belt latch -1-.
-- Install the bolt -4- into the spring and into the safety belt latch.
-- Slide the spring washer -2- over the bolt thread and turn it all the way until it stops.
Install in reverse order of removal. Note The Following:
-- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.
-- Mount the seat belt latch so that the pin -arrow A- fits into the hole -arrow B- on the seat frame.