Driver Side Airbag, Assembly Overview, Bolted Airbag Version
- Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and Steering Angle Sensor -G85-
- Overview. Refer to OVERVIEW - STEERING COLUMN SWITCH MODULE / STEERING COLUMN ELECTRONICS CONTROL MODULE -J527-, REMOVING AND INSTALLING .
- Steering Wheel
- Equipment levels
- Overview. Refer to STEERING WHEEL .
- Bolt
- Tightening specification : 30 Nm +90° / OVERVIEW - STEERING WHEEL (CABRIOLET) / OVERVIEW - STEERING WHEEL (COUPE) .
- Connector
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Connector
- For vehicles equipped with a multi-function steering wheel
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all Safety Precautions when working with pyrotechnic components. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Removing and installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING, BOLTED AIRBAG VERSION .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- 7 Nm
- Quantity: 2
- Cover Cap
- Quantity: 2
- For driver side airbag bolt