Headrest Cover And Cushion, Removing And Installing: Removing

Fig 1: Headrest Support Is Built Into Upholstery

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear headrests. Refer to HEADREST, REMOVING AND INSTALLING .

-- Open the zipper by inserting the Trim Removal Wedge 3409 between the zipper and the cover.

-- Tension the lower U-channel -2-.

-- Remove the upper cover with the flat channel -1- out of the lower U-channel -arrows-.

NOTE:

The cover must be completely open to remove the upholstery.

-- Remove the cover -3- from the support with the upholstery.