Backrest Cover And Cushion, Assembly Overview, Folding Seat

Fig 1: Identifying Backrest Cover And Cushion, Passenger Folding Seat

Courtesy of AUDI OF AMERICA, LLC

1. Pocket
   • For side airbag
   • Sewn into cover
2. Backrest Frame
3. Cushion
   • Cover with upholstery, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, FOLDING SEAT 
   • Cover, Separating from Cushion and Connecting. Refer to BACKREST COVER AND CUSHION, SEPARATING 
4. Wire
   • In foam in upholstery
   • For securing cover to upholstery
5. Cushion clip
   • For securing cover to upholstery
   • Always replace if removed
   • Install in same location as before removal
6. Contour Strip
   • Sewn into cover
   • For securing cover to upholstery
7. Cover
   • Cover with upholstery, removing and installing. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, FOLDING SEAT .
   • Cover, Separating from Cushion and Connecting. Refer to BACKREST COVER AND CUSHION, SEPARATING 
8. Zip Fastener
   • Close the zipper.