Headrest Cover And Cushion, Removing And Installing: Removing
-- Remove the front headrests. Refer to HEADREST, REMOVING AND INSTALLING .
-- Open the side locks -arrows- on the cover -1-.
-- Insert the Trim Removal Wedge 3409 in direction of -arrow A- between the cover zipper -1-.
-- Bend the lower U-channel -3- in the direction of -arrow B-.
-- Pull the upper side of the cover with the flat channel -2- out of the U-channel.
-- Open the zipper by inserting the Trim Removal Wedge 3409 between the zipper and the cover.
-- Bend the lower U-channel -1- in the direction of -arrow A-.
-- Pull the upper side of the cover with the flat channel -2- out of the U-channel.
NOTE:
The cover must be completely open to remove the upholstery.
-- Remove cushion -1- from cover -2-.