Input Shaft Seal, Replacing, 0BC: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Puller VW 391
- Adapter VW 771/40 from the Slide Hammer-Complete Set VW 771.
- Retainer 3028
- Puller T10055
- Adapter T10055/2
- Thrust Piece T40109
- Assembly Tool T40222/1
- Sealing Grease G 052 128 A1
- two bolts M 8 x 30
- One M 8 x 45 bolt