LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Rear Final Drive 0BC, 0BD, 0BE & 0BF) >> 39 Final Drive, Differential >> General Information >> Gear Oil, Checking Level >> Gear Oil, Checking Level, 0BC

Gear Oil, Checking Level, 0BC

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

-- Remove the plug to check the transmission fluid level -arrow-.

Fig 1: Removing Plug For Checking Transmission Fluid
GWWA39-10261Courtesy of AUDI OF AMERICA, LLC

The oil level is correct when the rear final drive is filled up to the lower edge of the filler hole.

-- Install the plug -arrow- and tighten it.

Tightening specification: 30 Nm