ATF, Draining, 0BE
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Drip Tray
- ATF plug overview, refer to GEAR OIL DRAIN AND INSPECTION PLUGS OVERVIEW .
-- Remove the ATF check plug -1- so that the ATF drains faster.
-- Remove the ATF drain plug -2- and drain the ATF.
-- Install the new drain plug -2- and tighten. Tightening specification -item 15- in FINAL DRIVE 0BE, 0BF OVERVIEW .
-- Fill the ATF in the rear final drive. Refer to ATF, FILLING, 0BE, 0BF .