LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [CEUA,CGTA,CTFA,CTGA,CTGF,DDTA] >> 21 Turbocharger, Supercharger >> Turbocharger >> Overview - Turbocharger >> Turbocharger Support - Tightening Specification and Sequence

Turbocharger Support - Tightening Specification and Sequence

Fig 1: Identifying Turbocharger Support And Bolts
GWWA21-10706

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specification
1. -1 through 3- 5 Nm
2. -1 through 3- 25 Nm

4 - Turbocharger Support

Fig 2: Engine Cover Temperature Sensor -G765- - Tightening Specification
GWWA24-11080

-- Tighten the bolt -2- to 9 Nm.

scientia non olet · About LEMON Manuals