LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [CEUA,CGTA,CTFA,CTGA,CTGF,DDTA] >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31- , REMOVING AND INSTALLING >> Removing

Charge Air Pressure Sensor -G31- , REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazard and risk of damage due to a missing engine cover.

  • The engine cover must be always be installed before the hood is closed.
  • The engine may not be started and the vehicle may not be driven with the hood closed without an engine cover.

-- Disconnect the connector -2- .

Fig 1: Identifying Bolts
GWWA21-10729

-- Remove the bolts -1- and remove the Charge Air Pressure Sensor -G31- .

scientia non olet · About LEMON Manuals