System, Venting Or Filling
-- Turn on the ignition.
VASPC
-- Vehicle Diagnostic Tester Connect.
-- Select "Guided Functions" mode.
-- Press the Go to button and select the "Function/component selection" and the following tree structures one after the other:
- Chassis
- Suspension
- 01 - On Board Diagnostic (OBD) capable systems
- 34 - Level Control System Control Module - J197
- J197 - Level control system control module functions
- J197 - Venting or filling the system
ODIS - Offboard Diagnostic Information System
-- Vehicle Diagnostic Tester Connect.
-- Select Diagnostic operating mode and start diagnostics.
-- Select the Test plan tab
-- Select the button Individual tests and select the following tree structures one after the other:
- Chassis
- Suspension
- 01 - On Board Diagnostic (OBD) capable systems
- 34 - Level Control System Control Module - J197
- J197 - Level control system control module functions
- J197 - Venting or filling the system
Continuation for All Vehicle Diagnostic Testers:
-- Continue to follow the instructions in the vehicle diagnostic tester display.