Input Shaft Seal, Replacing, 0BE: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Thrust Pad 16.5/28 mm Diameter VW 431
- Puller T10055
- -2- Adapter T10055/2
- Thrust Piece T10380
- Assembly Tool T40247
- Guide Sleeve T40247/1
- -1- 2-Arm Puller Kukko 20/10
- Inductive Heater VAS 6414
- or
- Commercially Available Heating Plate
- and
- Digital Thermometer VAS 6519
- Drip Tray
- Sealing Grease G 052 128 A1