LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Rear Final Drive 0BC, 0BD, 0BE & 0BF) >> 39 Final Drive, Differential >> Removal And Installation >> Hydraulic Control Module, 0BE, 0BF >> Removing >> Notes

Hydraulic Control Module, 0BE, 0BF: Removing: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Place the vehicle on a lift.

-- Lower the back section of the exhaust system just a little and secure it. If necessary remove the back section of the exhaust system. Refer to ENGINES CPNA - OVERVIEW - MUFFLER , ENGINES CTUB - MUFFLER OVERVIEW , ENGINES CEUA, CGTA, CTFA & CTFA - OVERVIEW - MUFFLERENGINES CDRA - EXHAUST PIPES/MUFFLERS, SEPARATING or ENGINES CEJA & CTNA - OVERVIEW - MUFFLER .

NOTE:

A second technician is needed to help remove the rear section of the exhaust system.