System, Venting Or Filling
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn on the ignition.
VAS PC
-- Vehicle Diagnostic Tester Connect.
-- Select "Guided Functions" mode.
-- Press the Go to button and select the "Function/component selection" and the following tree structures one after the other:
- Chassis (Repair Groups: 01; 40 to 49)
- Suspension (Repair group 01; 43 and 44).
- 01 - On Board Diagnostic (OBD) capable systems
- 34 - Level Control System Control Module - J197
- J197 - Level control system control module functions
- J197 - Venting or filling the system
ODIS - Offboard Diagnostic Information System
-- Vehicle Diagnostic Tester Connect.
-- Select Diagnosic operating mode and start diagnostics.
-- Select the Test plan tab
-- Select the button Individual tests and select the following tree structures one after the other:
- Chassis (Repair Groups: 01; 40 to 49)
- Suspension (Repair group 01; 43 and 44).
- 01 - On Board Diagnostic (OBD) capable systems
- 34 - Level Control System Control Module - J197
- J197 - Level control system control module functions
- J197 - Venting or filling the system
Continuation for All Vehicle Diagnostic Testers:
-- Continue to follow the instructions in the vehicle diagnostic tester display.