Final Drive Identification, 0BD

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

The 0BD rear final drive unit is used with the following transmissions:

6-Speed Manual Transmission 0B2 AWD
6-Speed Manual Transmission 0B4 AWD
7-Speed S tronic Transmission 0B5 AWD
6-Speed Automatic Transmission 0B6 AWD
8-Speed Automatic Transmission 0BK AWD

Allocation Rear Final Drive

Refer to CODE, TRANSMISSION ALLOCATION, RATIOS AND CAPACITIES

Location on Rear Final Drive

Fig 1: Final Drive 0BD Code Letters And Manufacture Date

Courtesy of AUDI OF AMERICA, LLC

Final drive 0BD, code letters and manufacture date -arrow-

-Arrow A- Final Drive 0BD with Part Number (example: 0BD 500 043A)

Fig 2: Final Drive 0BD Including Part Number

Courtesy of AUDI OF AMERICA, LLC

-Arrow B- Code letters "JTN"

-Arrow C- Rear final drive date of manufacture

Example:	F	292	3242
	I	I	I
	Production year - 2006- F = 2006, G = 2007, H = 2008, etc.	Production date -292nd calendar day- (always given in three-digit format)	Day of manufacture serial number

Additional data can be ignored.

NOTE:

When installing a new rear final drive unit, the rear final drive code, the PR number and the vehicle engine code must be verified . This is the only to assure the correct allocation.