Knock Sensor 1 -G61-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Engine Temperature Control Actuator -N493-. Refer to ENGINE TEMPERATURE CONTROL ACTUATOR -N493-, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Free up the wire -1- for Knock Sensor 1 -G61-. To do so, release the catch in direction of -arrow- from bracket -2-.
-- Remove the Knock Sensor 1 -G61- -arrow-.