LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1143 (Ignition/Glow Plug System (CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA)) >> Ignition/Glow Plug System >> Ignition System >> Cam Position Sensors, Removing And Installing >> Cam Position Sensor -G40-, Removing And Installing >> Installing

Cam Position Sensor -G40-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal And Note The Following: 

-- Install the intake manifold. Refer to INTAKE MANIFOLD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals