Engine Cover Temperature Sensor -G765- , REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazard and risk of damage due to a missing engine cover.

The engine cover must be always be installed before the hood is closed.
The engine may not be started and the vehicle may not be driven with the hood closed without an engine cover.

Engine Codes CEUA/CTGA/CTGF:

Fig 1: Air Guide Pipe And Clamps

-- Loosen the hose clamps -arrows- to remove the air duct pipe.

Continuation for All Vehicles:

Fig 2: Engine Cover Temperature Sensor -G765- - Tightening Specification

-- Disconnect the connector -1- .

-- Remove the bolt -2- and then remove the Engine Cover Temperature Sensor -G765- .