Charge Air Pressure Sensor 2 -G447- , REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazard and risk of damage due to a missing engine cover.

The engine cover must be always be installed before the hood is closed.
The engine may not be started and the vehicle may not be driven with the hood closed without an engine cover.

-- Disconnect the connector -2- .

Fig 1: Identifying Charge Air Pressure Sensor 2 And Bolts

-- Remove the bolts -1- and then remove the Charge Air Pressure Sensor 2 -G447- .