LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [CEUA,CGTA,CTFA,CTGA,CTGF,DDTA] >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Removing

Charge Air Cooler, Removing And Installing: Removing

NOTE:

Follow all the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

WARNING:

Fire hazard and risk of damage due to a missing engine cover.

  • The engine cover must be always be installed before the hood is closed.
  • The engine may not be started and the vehicle may not be driven with the hood closed without an engine cover.
NOTE:

Place a cloth underneath to catch any leaking coolant.

Fig 1: Identifying Charge Air Cooler Bolts
GWWA21-10826

-- Loosen the hose clamps -1- , then clamp off the coolant hoses with the :3094  and then remove them.

-- Remove the bolts -arrows- and then remove the charge air cooler from the charge air cooler housing.

scientia non olet · About LEMON Manuals