LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger, Supercharger [CEUA,CGTA,CTFA,CTGA,CTGF,DDTA] >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Installing

Charge Air Cooler, Removing And Installing: Installing

Install in reverse order of removal and note the following:

NOTE:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .

Replace the seal.

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the PartsInformation.

All of the coolant must be changed if the radiator was replaced.

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals