Component Location Overview - Drain Plug, Fill Plug And Check Plug

NOTE:

All assembly work and tightening specifications are also outlined in the "S tronic Transmission Internal Components" service information.

Fig 1: ATF Drain, Fill And Check Plugs Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

ATF Drain Plug
- Tightening specification 45 Nm
Seal
- For the ATF drain plug
- Replace
Transmission Fluid, Manual Transmission Fluid (MTF) Fill and Check Plug
- Tightening specification 45 Nm
- Inside the manual transmission, front final drive and transfer case
ATF Fill and Check Plug
- Tightening specification 45 Nm
Transmission Fluid (MTF) Drain Plug
- Tightening specification 45 Nm
- Depending on the date of manufacture, Transmission Fluid Temperature Sensor 2 -G754- may also serve as the transmission fluid drain plug; tightening specification for removing and installing. Refer to TRANSMISSION FLUID, DRAINING AND FILLING for Vehicles with Transmission Fluid Temperature Sensor 2 -G754- -1- Instead of a Transmission fluid (MTF) Drain Plug.