A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING: Notes
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The cooling output cannot be checked when the A/C Pressure/Temperature Sensor -G395- is removed. The Climatronic Control Module -J255- display and control head does not switch on the A/C compressor.
The refrigerant circuit remains closed, connection with valve.
Only the A/C Pressure/Temperature Sensor -G395- may be installed on this vehicle (the data exchange occurs via the LIN Bus).
A High Pressure Sensor -G65- cannot be installed on this vehicle (it only delivers square-wave signals).