Fresh Air Blower Control Module -J126-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the passenger seats as far back as possible.
-- Turn off the ignition.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Disconnect the connector -A- and -B-.
-- Remove the bolts -C-.
WARNING:
The heat sink on Fresh Air Blower Control Module -J126- may be hot.
-- Remove the Fresh Air Blower Control Module -J126- -D- from the air intake housing.