Right Front Upper Body Vent Temperature Sensor -G386-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .

-- Disconnect the connector -A- from the temperature sensor.

Fig 1: Disconnect Connector From Temperature Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Turn the Right Front Upper Body Vent Temperature Sensor -G386- -B- approximately 90° and remove it from the mount in the air guide channel -D-.