LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S6 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Heating, Ventilation & Air Conditioning (2 Of 2) (Sedan)) >> 87 Air Conditioning >> Additional Components For Control And Regulation >> Left Front Upper Body Vent Temperature Sensor -G385-, REMOVING AND INSTALLING >> Removing

Left Front Upper Body Vent Temperature Sensor -G385-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the storage compartment on driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -A- from the temperature sensor.

Fig 1: Disconnect Connector From Temperature Sensor
GWWA87-10433Courtesy of AUDI OF AMERICA, LLC

-- Turn the Left Front Upper Body Vent Temperature Sensor -G385- -B- 90° and remove it from the mount in the air guide channel -D-.