Lock Carrier Cover, Removing And Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- To remove, remove the locking pin and release the expanding clip.
- Remove the expanding clip from the cover.
- Remove the cover back from the radiator grille.
- When installing, the tabs on the cover must engage on the radiator grille and on the sides of the bumper cover.
- Insert the expanding clip through the cover into the lock carrier and press the locking pin in.
- Expanding Clip
- Remove the clamping pin when removing.
- Only press the clamping pin in when installing.
- Quantity: 4
- Lock Carrier
- Radiator Grille