Flange/Driveshaft Seal, Rear Final Drive 0BE: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2015 Audi RS 5, and 2014 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools and workshop equipment required
- Thrust Pad 16.5/28 mm Dia. VW 431
- Puller T10055
- Adapter T10055/2
- Thrust Piece T10380
- Guide Sleeve T40247/1
- Assembly Tool T40247
- Two Arm Puller Kukko 20/10
- Inductive Heat Unit VAS 6414
- or
- Hotplate
- and
- Digitaly VAS 6519
- Catch Tray
- Sealing Grease G 052 128 A1