Left Flange Shaft, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 Audi S4, 2015 Audi S4, 2014 Audi S4, 2013 Audi S4, and 2012 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.

Secure the transmission on the Engine And Transmission Holder VAS6095. Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .

-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

Fig 1: Identifying Bolts & Flange Shaft Mounting Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left flange shaft -2- from the transmission in direction of -arrow A-.

Fig 2: Identifying Left Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -1- and -arrow 3, B-.

-- Remove the flywheel FLYWHEEL, REMOVING AND INSTALLING .