Overview - Driver Side Airbag, Bolted Airbag Version
- Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and Steering Angle Sensor -G85-
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Steering Wheel
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Bolt
- Tightening specification. Refer to STEERING WHEEL .
- Connector
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Connector
- For vehicles equipped with a multifunction steering wheel
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- 7 Nm
- Quantity: 2
- Closure Cap
- Quantity: 2
- For driver side airbag bolt
- Locking Bracket
- Use a T25 TORX screwdriver, approximately 100 mm long
- Steering Column Electronics Control Module -J527-
- With Airbag Spiral Spring/Return Spring with Slip Ring -F138- and Steering Angle Sensor -G85-
- Removing and Installing. Refer to SENSORS
- 4-Spoke Steering Wheel
- Equipped on some models
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Press in to secure in the pockets on the steering wheel.
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- Tightening specification. Refer to STEERING WHEEL .
- 3-Spoke Steering Wheel
- Equipped on some models
- Removing and installing the steering wheel. Refer to STEERING WHEEL .
- Wiring Harness
- For the Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Replacing. Refer to AIRBAG CONNECTOR, REPLACING .
- Press in to secure in the pockets on the steering wheel.
- Driver Side Airbag
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-WARNING:
Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and Installing. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
- With Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-
- Bolt
- Tightening specification. Refer to STEERING WHEEL .