LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Passenger Protection, Airbags, Seat Belts (Cabriolet) >> 69 Passenger Protection, Airbags, Seat Belts >> Driver Side Airbag >> Airbag Connector, Replacing >> Airbag Connector, Replacing, Bolted Airbag Version >> Removing

Airbag Connector, Replacing, Bolted Airbag Version: Removing

Fig 1: Identifying Airbag Connector
GWWA69-10439Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
WARNING:

Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .

-- Remove the driver side airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .

WARNING:

Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Disconnect the connectors -4, 6 and 7-.

-- Unlock the connector locks -8- using a small screwdriver and then disconnect the connectors -1 and 2- for Driver Airbag Igniter -N95- and Driver Airbag Igniter 2 -N250-.

-- Disengage and remove the wire -3- on the bracket -5-.

scientia non olet · About LEMON Manuals