Over-Center Spring: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Remove the left footwell vent. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN PASSENGER COMPARTMENT .
-- Actuate the clutch pedal -1- in direction of -arrow-. Press the T40025 over the stretched over-center spring -2-.
-- Press the clutch pedal down as far as the stop and remove the over-center spring downward with the assembly clamp.