Gearshift Knob With Gearshift Lever Boot Overview
WARNING: This page is about a different variant/trim than selected.
- Gearshift Knob
- With shift lever boot
- Removing and installing, refer to SHIFT KNOB WITH SHIFT LEVER BOOT
- Clamp
- Secures the shift lever knob to the shift lever.
- Attach using hose clamp pliers V.A.G 1275
- Boot
- Available only together with the support ring -item 4- 4.
- Remove and install together with the noise insulation -item 5- 5NOISE INSULATION
- Support Ring
- Available only together with the boot -item 3- 3
- Noise Insulation
- Removing and installing, refer to NOISE INSULATION
- Gasket
- Nut
- 8 Nm
- Mount
- For the shift lever support
- Shift Lever with Shift Lever Support