Wheel Bearing Unit, Front Wheel Drive (Fwd), Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Puller - Grease Cap :VW637/2
- Seal Installer - Camshaft Installer Kit - Sleeve:3241/4
- Torque Wrench 1332 40-200 Nm :VAG1332
- Torque Wrench 1410:VAG1410
- Grease
NOTE:
For a short period of time, wheel bearing housings for All Wheel Drive (AWD) vehicles were installed on Front Wheel Drive (FWD) vehicles -item ) OVERVIEW - WHEEL BEARING, VEHICLES WITH FRONT WHEEL DRIVE (FWD) - WHEEL BEARING HOUSING. A mixed installation is not permitted. Procedure for vehicles equipped with All Wheel Drive (AWD) wheel bearing housing. Refer To WHEEL BEARING UNIT, ALL WHEEL DRIVE (AWD), REMOVING AND INSTALLING and WHEEL BEARING UNIT, SERVICING .
For a short period, steel wheel bearing housings instead of aluminum wheel bearing housings were installed on Front Wheel Drive (FWD) Vehicles. Do not install both types together.