Wheel Bearing Unit, All Wheel Drive (AWD), Removing And Installing: Removing

Fig 1: Bolts And Wheel Bearing Unit

Courtesy of AUDI OF AMERICA, LLC

-- Remove wheel bearing housing. Refer To WHEEL BEARING HOUSING, ALL WHEEL DRIVE (AWD), REMOVING AND INSTALLING .

-- Clamp the wheel bearing housing in a vise with protective covers.

-- Remove the bolts -1- and the wheel bearing unit -2-.

Fig 2: Always Set Wheel Bearing Down On Wheel Hub -2- (Wheel Bearing -1- Facing Up)

Courtesy of AUDI OF AMERICA, LLC

• The wheel bearing -1- must face up in order to remove the wheel bearing unit.
• Always set the wheel bearing unit down on the wheel hub -2-.
• Never reach into the inside when lifting the wheel bearing.
  Fig 3: Correct & Incorrect Holding Of Wheel Bearing

  Courtesy of AUDI OF AMERICA, LLC
• Hold the wheel bearing only on the outside.

The same procedure also applies to the wheel bearing without a wheel hub.