SUBFRAME, Servicing, Rear Bonded Rubber Bushing For Rear Final Drive, All Wheel Drive (AWD) Vehicles: Installing

Installation Is The Reverse Of Removal, With Special Attention To The Following: 

-- Note The Installation Position For The Rubber Bonded Bushing.

-- The Arrows On The Back Of The Rubber Bonded Bushing Must Point Up Or Down.

Fig 1: Arrows On The Back Of The Rubber Bonded Bushing Must Point Up Or Down

Courtesy of AUDI OF AMERICA, LLC

-- Attach the tools and the bonded rubber bushing to the subframe as illustrated.

Fig 2: Attach Tools And Bonded Rubber Bushing To Subframe As Illustrated

Courtesy of AUDI OF AMERICA, LLC

1. :T40185/2  . Side "B" must face the subframe.
2. :3301 
3. :3346/3 
4. :T40185/9 
5. Subframe
6. Bonded Rubber Bushing
7. :T40185/8 

-- Install the bearing all the way into the subframe while turning at the :3346/3  and counter-holding at the :T40185/9  .