LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 78 (Rear Suspension (1 Of 2) (Coupe)) >> 42 Rear Suspension >> Drive Axle >> Outer CV Joint, Checking >> Assembling

Outer CV Joint, Checking: Assembling

WARNING: This page is about a different variant/trim than selected.

-- Insert cage with hub into joint body.

NOTE:

Cage must be installed laterally correct.

-- Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be established again.

-- Press grease into joint body.

Grease capacities and types, drive axle with 88 mm diameter or 100 mm diameter outer CV joint. Refer To GREASE QUANTITY AND TYPE .