Refrigerant Lines, Disconnecting And Connecting At Condenser, RS Models: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition.
-- Discharge the refrigerant circuit. Refer to REFRIGERANT CIRCUIT (Refrigerant R134a, Servicing; Refrigerant Circuit, Using Service Station).
-- Remove the air guide for the left auxiliary radiator. Refer to RADIATOR/COOLANT FAN [For transmission(s) 0B6] [For engine(s) CAUA] or RADIATOR/COOLANT FAN [For engine(s) CFSA] or RADIATOR/RADIATOR FAN [For engine(s) CAED, CAEB, CPMB, CPMA] or RADIATOR/COOLANT FAN [For engine(s) CALA] .
-- Remove the bolt -B-.
-- Remove the refrigerant line -A- from the condenser.
-- Remove the bolt -1-.
-- Remove the refrigerant pipe -2- from the condenser.
-- Seal the open lines and connections with clean plugs from the :VAS6122 .