Refrigerant Lines, Disconnecting And Connecting At Condenser, RS Models: Notes

There are different versions of the condenser. Ensure the correct version and allocation before installing. Refer to CONDENSER, CHECKING VERSION  and the Parts Information.

It may be necessary to evacuate the refrigerant circuit and remove the refrigerant pipes from the condenser in order to remove the condenser from the front end or to remove the radiator depending on the version of the radiator and the condenser (for example, on the Audi RS 4 and the Audi RS 5). Refer to CONDENSER, REMOVING AND INSTALLING .

On the Audi RS 4 and Audi RS 5, a different version of the condenser is installed than as on other vehicles of this series and the length of the refrigerant lines may also differ from other vehicles. Pay attention to the correct allocation and refrigerant R134a capacities. Refer to APPROVED REFRIGERANT OILS AND REFRIGERANT OIL CAPACITIES and the Parts Information.