Condenser, Removing And Installing, RS Models: Removing
-- Turn off the ignition.
-- Discharge the refrigerant circuit. Refer to REFRIGERANT CIRCUIT
-- Remove the refrigerant lines from the condenser. Refer to REFRIGERANT LINES, DISCONNECTING AND CONNECTING AT CONDENSER .
-- Remove the bolts -arrows-.
-- Remove the left and right air guide -1- from the intermediate flange -2- on the air filter housing.
-- Unlock the retaining straps in direction of -arrows A- (each two straps, one on top and one below on the air guide) and move the left and right air guide -1- toward the center of the vehicle in direction of -arrow B-.
On vehicles with a grille -A- (only specific vehicles with safety feature against rocks and stone chips) the front bumper cover and grille -A- must be removed in order to move and remove the air duct -B-.
-- Unlock the retaining clamps -1- in direction of -arrow A- and remove the condenser -2- upward and out of the brackets on the radiator in direction of -arrows B-.