LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 74 (Glass, Window Regulators (Coupe)) >> 64 Glass, Window Regulators >> Windshield >> Windshield, Removing And Installing >> Preparations For Installing Windshield

Preparations For Installing Windshield

WARNING: This page is about a different variant/trim than selected.

-- When reusing the undamaged window, cut the rest of the adhesive material on the window and flange with the Window Cutter:VAG1561A  and Window Cutter - Scraper (2 pc.):VAG1561/8  so it is even, but do not remove it completely.

NOTE:

The remaining material acts as a base for the new adhesive to be applied.

CAUTION:
  • Keep the adhesive surface free of dirt and grease.
  • Cut back the adhesive surface shortly before installing.
  • Do not prime or use a cleaning solution on the adhesive surface.
scientia non olet · About LEMON Manuals