Navigation System With Cd Drive Control Module -J401-, Removing And Installing, Basic Plus: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Radio Removal Tool:T10057
- Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9 .
The Navigation System with CD Drive Control Module -J401- is located in the glove compartment.
-- Turn Off All Electrical Consumers.
-- Remove The Key.
-- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault Finding ".
Use Vehicle Diagnostic Tester.