MULTIFUNCTION Buttons, Removing And Installing, Through My 2011: Removing

-- Remove The Driver Airbag, Refer To DRIVER SIDE AIRBAG .

-- Disconnect Trim Ring From Steering Wheel.

-- Disconnect And Remove The Connector -1- From The Button -2-.

Fig 1: Identifying Harness Connector And Slide Button

Courtesy of AUDI OF AMERICA, LLC

-- Slide Button -2- Out Of Steering Wheel In Direction Of -arrow-.

-- Turn The Button Around.

-- Release And Disconnect The Connector -2- For The Tiptronic Switch From The Multifunction Button -1- And Then Remove It.

Fig 2: Identifying Harness Connector And Tiptronic Switch At Multi-Function Button

Courtesy of AUDI OF AMERICA, LLC