MULTIFUNCTION Buttons, 4-Spoke Steering Wheel, Removing And Installing, From My 2012: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Trim Removal Wedge:3409
The multifunction buttons -2- are attached to the trim -1-. The trim -1- and the multifunction buttons -2- are attached to the steering wheel. The multifunction buttons -2- have an extra retainer -3-.
While removing, first make sure the trim -1- can be loosened by hand (approximately 5 mm). Then, using the Trim Removal Wedge:3409 , open the retainers -3- on the multifunction buttons -2- and remove the trim -1- together with the multifunction buttons -2-.
Trim retainers
- Trim Molding
Arrows - tabs
Multifunction button retainers
- Multifunction button
- Catch
-- Turn Off All Electrical Consumers.
-- Turn Off The Ignition And Remove The Key.