MULTIFUNCTION Buttons, 3-Spoke Steering Wheel, Removing And Installing, From My 2012: Installing

-- Install In Reverse Order Of Removal, Noting The Following: 

-- Mount the trim, with the multifunction buttons installed, on the steering wheel.

-- Route the connection cable for the tiptronic switch -2- as illustrated.

Fig 1: Be Careful Of Connectors To Tiptronic Switches

Courtesy of AUDI OF AMERICA, LLC

-- Route the rest of the connection cable, including the connector, into the guides inside the steering wheel.

-- Press the trim -2- with the multifunction button onto the steering wheel -1- until it audibly engages.

Fig 2: Locating Trim With Multifunction Buttons

Courtesy of AUDI OF AMERICA, LLC

-- Make sure the wires are routed correctly in the steering wheel.