Tools And Materials Available From Distribution Center Or Importer: Notes
Service Station/A/C Service Station (this Illustration Shows), Currently Available A/C service stations. Refer to the parts information (Tools; Special Tools and Equipment: A/C and Heating).
- Work procedures: The operations "testing, extraction (recycling), evacuation and charging" are to be performed in line with the relevant operating instructions.
- The filters and dryers installed are to be replaced at the latest at the end of the period of use specified in the operating instructions and whenever the station has been drained (keep replacement filter to hand. Available from equipment manufacturer. Refer to A/C service station operating instructions.
- Use can also be made of service stations not described here. Refer to the parts information (Tools; Special Tools and Equipment: A/C and Heating).
- Currently available A/C service stations are equipped with a program for flushing the refrigerant circuit; the flushing equipment required for flushing is also included in delivery of these A/C Service Stations. Refer to the parts information (Tools; Special Tools and Equipment: A/C and Heating).
This A/C service station has the following known units: charging cylinder, pressure gauge set, vacuum pump, shutoff valves and charging hoses.
One quick-release coupling each (for service connections on high and low-pressure side) is included in the scope of delivery of this service station.
Current vacuum display (LED) appears after pressing the "Evacuate" button again.
Leak Detection Unit, Currently Available Leak Detection Units. Refer to the parts information (Tools; Special Tools and Equipment: A/C and Heating).
Leak Detection System (for example Leak Detection Kit:VAS6201A , Currently Available Leak Detection Systems. Refer to the parts information (Tools; Special Tools and Equipment: A/C and Heating).
Puller for A/C Clutch Set:VAG1719 (for "Zexel" A/C compressor)
A/C Adapter Set:VAG1785
Adapter for cleaning refrigerant circuit (flush with refrigerant R134a. Refer to REFRIGERANT CIRCUIT, CLEANING (FLUSHING) WITH REFRIGERANT R134A ; or blow through with compressed air and nitrogen. Refer to REFRIGERANT CIRCUIT, FLUSHING WITH COMPRESSED AIR AND NITROGEN .)
A - 5/8"-18 UNF thread for conical seal
B - Union nut (for connection with O-ring) with thread
- A/C Adapter Set - M18 x 1.5:VAG1785/1
- A/C Adapter Set - M20 x 1.5:VAG1785/2
- A/C Adapter Set - M24 x 1.5:VAG1785/3
- A/C Adapter Set - M28 x 1.5:VAG1785/4