Upper Control Arm, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove The Wheel.

-- Disconnect The Threaded Connection -1-.

Fig 1: Identifying Booth Joint Pins In Upper Control Arm

Courtesy of AUDI OF AMERICA, LLC

-- Remove Booth Joint Pins In The Upper Control Arm -2- From The Wheel Bearing Housing.

The Slits In The Wheel Bearing Housing Must Not Be Widened Using A Chisel Or Similar Tool!

-- Remove The Nuts -3 And 6-.

-- Remove The Bolts -4 And 5- And Remove The Upper Control Arm Upward.