Tower Brace, Removing And Installing: Removing

-- Remove the plenum chamber cover. Refer To PLENUM CHAMBER COVER, REMOVING AND INSTALLING .

-- Remove The Bolt -1- And Remove The E-Box From The Tower Brace In The Direction Of The -arrow-.

Fig 1: Identifying Bolt And E-Box To Tower Brace

Courtesy of AUDI OF AMERICA, LLC

-- Release The Connector Bracket On The Bottom Of The Connector And Push The Connector Toward The Rear From The Tower Brace.

-- Remove The Bolts -1- And Nuts -2- And The Tower Brace -3-.

Fig 2: Identifying Bolts, Nuts And Tower Brace

Courtesy of AUDI OF AMERICA, LLC